In the September edition of the Presidents Newsletter we cover the following topics:
Click here to read the newsletter in full.
Click here to read the newsletter in full. N.A. Cristaudo and J.J. Mayo National Measurement Institute, Australia (NMIA) Department of Industry, Innovation and Science GPO Box 2013, Canberra ACT 2601, Australia legislativereview@measurement.gov.au Abstract Australia is currently planning a thematic review of its national measurement legislative framework. The aim is to modernise Australia’s measurement framework towards a more principles-based approach, to provide greater regulatory flexibility, encourage investment and support innovation for new technologies. 1. Introduction Measurement which draws on appropriate scientific and technical expertise is central to the effective functioning of a modern economy. Historically legal metrology originated from the need to facilitate fair trade and placed a strong focus on requirements for measuring instruments, measurements and testing methods. More modern policy priorities place the role of government in supporting strategic measurement capabilities and processes that will enhance business and consumer confidence, providing a strong effective system that is trusted and accepted both domestically and internationally. While there has not been a systemic failure of Australia’s national measurement legislation, it is complex, overly prescriptive and outdated. To ensure that Australia’s measurement system is fit-for-purpose, there is a need for a more efficient legislative framework consistent with the government agendas for best practice regulation. 2. Australia’s national measurement legislation The principal legislation concerning legal metrology in Australia is the National Measurement Act 1960 (Cth) (the Act). The Act and its subordinate instruments, the National Measurement Regulations 1999 (Cth) and the National Trade Measurement Regulations 2009 (Cth) together with determinations and recognized-value standards of measurement issued by the Chief Metrologist form Australia’s national measurement legislative framework. Australia’s national measurement legislative framework establishes the National Measurement Institute, Australia (a division of the Australian Government Department of Industry, Innovation and Science) as Australia’s peak body responsible for a top-level infrastructure for biological, chemical, legal, physical and trade measurement. 3. Recent reviews of Australia’s national measurement system 3.1 Independent Review In 2015, an independent review of Australia’s legal metrology and measurement policy identified the need to modernise and better align Australia’s national measurement legislative framework with Australian Government and international policy objectives. The independent review noted that Australia’s national measurement legislation is currently very prescriptive by principles-based, best practice regulatory standards and should be reviewed to simplify the regulatory framework and reduce the amount of prescription. 3.2 Legal Metrology Strategic Policy Review The thematic review of Australia’s national measurement legislative framework builds on the outcomes of Australia’s 2016 ‘Legal Metrology Strategic Policy Review’ which aimed to articulate policy objectives to ensure a streamlined and effective regulatory system and measurement framework. 3.3 Labelling Review A review has commenced on the labelling and quantity information required for packages sold in Australia under Part 4 of the National Trade Measurement Regulations 2009 (Cth). This review is being undertaken to consider options to provide more flexible arrangements and encourage investment in the short-term. The thematic review of Australia’s national measurement legislation will build on the outcomes of the labelling review of Part 4 of the National Trade Measurement Regulations 2009 (Cth) to inform options to modernise the framework. 4. Thematic review of Australia’s national measurement legislation The thematic review will cover the Act and all legislative instruments made under the Act. The aim is to ensure Australia’s national measurement legislation is fit-for-purpose for current and future opportunities or challenges. The thematic review aims to develop options and recommendations in relation to:
5. Approach To accommodate for a comprehensive analysis of the entire legislative and policy framework, Australia’s national measurement legislation has initially been divided into sixteen “thematic areas” that represent broad topics that form the current legislation (see Table 1). Table 1: Thematic areas of Australia’s national measurement legislation.
The review will involve a systematic examination of the “thematic areas” and will be informed by tailored engagement and consultation. A comprehensive list of stakeholders groups has been established covering manufacturers, retailers, industry, consumers, utilities, appointed laboratories, licensed businesses, domestic and international standards and conformance bodies and other levels of government.
The thematic review will consider and consult on a wide variety of options, including options to improve competition, facilitate innovation and reduce regulatory burden on business. To assist this process an intra-government advisory group, chaired independently by Mr Edward Killesteyn, PSM, has been established to ensure the thematic review considers whole-of-government perspective on options for reform measures. The thematic review aims to be completed within a five year period (to enable sufficient time to introduce revised legislation to the Australian Parliament and allow for sufficient education and transition periods). Options for reform are aimed to be presented to government for consideration in 2020, following the conclusion of public consultation. 6. Setting the course Although Australia’s measurement system has been evolving since Federation, the current legislation which underpins the system has never been reviewed to examine the appropriateness of the entire legislative and policy framework. Changes in technology, industry and consumers call for a major rethinking of Australia’s national measurement legislative framework to ensure it continues to deliver benefits which underpin the many sectors of the Australian economy, now and into the future. Given the wide reach of any country’s measurement system, the thematic review of Australia’s national measurement legislative framework will be informed by robust and comprehensive engagement with domestic and international stakeholders. A public consultation process involving key international bodies, such as the Asia-Pacific Legal Metrology Forum (APLMF) and the International Organisation of Legal Metrology (OIML) during the review process, will be leveraged to ensure international considerations and adoption of best practice regulation principles. 7. Engagement For further information regarding Australia’s thematic review of its national measurement legislative framework please contact: legislativereview@measurement.gov.au Dear APLMF Members and colleagues
It is hard to believe we are past the mid-point of the year. The Secretariat and I have been working hard on our 2017 work programme including our agreed actions following the 23rd APLMF meeting. We have been communicating with you quite a bit; requesting feedback on various documents, surveys for completion and our first online voting. Thank you for your efforts to date and we encourage all member economies to engage with these activities to ensure all your voices are heard. Current deadlines:
24th Asia-Pacific Legal Metrology Forum and Working Group Meetings The meeting webpage is now open and invitations have been sent out to members. I warmly invite delegates to attend these events which will be held in Siem Reap, Cambodia, Wednesday 25 to Friday 27 October 2017. The meetings will be hosted by the National Metrology Center (NMC) of Cambodia at the Apsara Angkor Resort and Conference Hotel. Please see our website for information about the programme, venue, visa requirements and online registration. To assist with arrangements we would ask that you register before 20 September 2017. See: www.aplmf.org/cambodia-2017 Workshop on ‘Modernising National Metrological Infrastructures – key issues – approaches – lessons learned’ I was lucky enough to attend this successful event held in Malacca, Malaysia from 22-23 May 2017 in addition to participation in a MEDEA project evaluation workshop and attendance at an APMP Developing Economy Committee meeting. Marian Haire and I represented APLMF at these events hosted by the National Metrology Institute of Malaysia (NMIM) and attended by approximately 60 delegates representing 20 economies. See: www.nmim.gov.my The Joint APMP/APLMF Workshop on Modernising National Metrological Infrastructure was part of the Metrology Enabling Developing Economies in Asia (MEDEA) project and held in conjunction with the Asia-Pacific Metrology Program (APMP) mid-year meetings. The workshop launched the revised APLMF/APMP Joint Guide 1 on National Metrological Infrastructure as well as introduced participants to the Asia-Pacific Metrology portal that is under development. It also provided participants guidance on best practice in respect to raising awareness of the importance of metrology and case study development. World Café: Group Workshop sessions held during the event clustered participants into small groups and enabled economy representatives to share their knowledge, experience and what they have learnt from the issues they have faced with their peers and other experts present. These Café style discussions were very interesting and productive. They enabled participants to effectively share ideas and consider new approaches to address the challenges they face. Participants started to develop work programmes for implementation on their return to their respective economies and I will be very interested to follow up and hear about the tangible results of this work. Following on from the workshop we will be contacting those who suggested ideas for case studies and helping to shape their draft case studies for publication on our website. The template we have developed and the examples of case studies we eventually publish will be valuable resources for use by economies as we try to tackle issues to do with a lack of metrology awareness. 2016 Financial Report The 2016 Annual Financial Report has been signed off by the Executive Committee and full member economies have been invited to vote to adopt the 2016 Financial Report. Full members received an email on 23 May with a link to the member only pages of the APLMF website where they could view the document and cast their vote. Please note, minor updates have been made to the financial report as a result of member feedback and an updated version was posted to the website on 1 June. The changes were a result of a rounding error found in the original report and were not material. To date we have just 7 votes. As this is the first time we have used online voting we have extended to 31 July 2017 and we would encourage all member economies to participate. APLMF Strategic Plan A draft strategic plan was introduced at the 23rd APLMF meeting. Feedback from that meeting was included in a second draft which was circulated to the Executive Committee. Version 3 of the APLMF Strategic Plan 2017-2021 has now been completed and a link for voting will be sent to member economies to vote to adopt the Strategic Plan and voting will close 18 August 2017. Survey on Legal Measures mechanism on Medical Devices Member Economies where emailed the invitation to participate in this survey on 22 May 2017. The survey was developed by the Working Group on Medical Measurement. We would ask you to complete the survey by 31 July 2017 and send it directly to the Chair as noted in the information. 23rd Asia-Pacific Legal Metrology Forum and Working Group Meetings – Highlights We hope you received our May update and have had a chance to check out the highlights from the 2016 meeting provided in video format. The first video summarises the Working Group day and guest presentations, the second video summarises the Economy Reports. The draft meeting minutes for this meeting have also been sent to all registered delegates for their feedback. We would encourage those who attended to please read the draft minutes and provide any comments to secretariat@aplmf.org by 31 July 2017. 25th Asia-Pacific Legal Metrology Forum and Working Group Meetings In 2018 APLMF will celebrate 25 years which is an exciting milestone. I am actively looking for an economy who would like to host this auspicious event. Please contact the Secretariat if you are interested in hosting and would like some more information about what hosting a forum event involves. ‘Full Member Only’ area of the website A reminder that the primary contact for each full member economy was sent login and password details for the ‘full member only’ area of the website on 28 March 2017. It will be up to the primary contact to provide these details to staff within their economy. If your economy hasn’t received this information, please contact secretariat@aplmf.org so we can check we have the correct details for the primary contact for your economy. Consultation/feedback on draft APLMF Guide 7 – Verification of Fuel Dispensers Thank you to Australia, Papua New Guinea Thailand and Vietnam for your feedback. An updated document will be circulated to members for voting to adopt, in due course. Test Procedure Survey – Non-Automatic Weighing Instruments (NAWI) – extended to 31 July 2017 Thank you to Australia, Cambodia, Canada, Japan, New Zealand, Philippines, Papua New Guinea, Singapore, Chinese Taipei and Vietnam for your responses to this survey. We would really like more responses to include in the final analysis so have extended the deadline to 31 July 2017 and encourage you to participate. New APLMF Membership The Secretariat is currently drafting a Membership discussion paper which will outline the options and impact of changing our current membership criteria. This paper will be available in July for your review and input. The intention is to have the paper finalised for final voting before our 24th APLMF meeting in Cambodia later in the year. Invoices for APLMF Membership Fees For 2017 were sent to the primary contact for each member economy in December 2016. Invoices are due for payment by 30 September 2017. Please contact secretariat@aplmf.org if you have not received an invoice for your economy. Training for 2017 Please refer to our website which is updated as new information comes to hand. Economy Directories In early June, we followed up with the 12 economies who are still to update their Directories for the website. We look forward to receiving those over the coming months. Other Events of note Australian Measurement Conference 'Realising the value of metrology' Brisbane 12-14 Sep 2017 Stephen O’Brien APLMF President At its meeting in October 2016, the International Committee of Legal Metrology (CIML) decided that the existing OIML Certification Systems will be replaced by a new single Certification System (OIML-CS) on 1 January 2018. The consequence is that after 1 January 2018 both OIML MAA Certificates and Basic Certificates will no longer be issued – instead, OIML-CS Certificates will be issued.
This change will affect all stakeholders: manufacturers, Issuing Participants under the MAA, Issuing Authorities under the Basic System, Utilizers and users of OIML MAA and Basic Certificates. Therefore a one-day seminar on the new OIML-CS is planned on 15 June 2017. Information on the seminar, including how to register, can be found here. The 20th of May will mark this years World Metrology Day. The theme this year is 'Measurements for transport'. This theme was chosen because transport plays such a key role in the modern world. We not only move ourselves, but also the food we eat, the clothes we wear, the goods we use and rely on, not forgetting the raw materials they are made from. Doing so safely, efficiently and with minimal environmental impact requires an astonishing range of measurements.
World Metrology Day is an annual celebration of the signature of the Metre Convention on 20 May 1875 by representatives of seventeen nations. The Convention set the framework for global collaboration in the science of measurement and in its industrial, commercial and societal applications. The original aim of the Metre Convention - the world-wide uniformity of measurement - remains as important today as it was in 1875. You can learn more about World Metrology Day on the joint BIPM & OIML website. Following on from the 23rd APLMF and Working Group Meetings held in Tokyo we have produced two short videos on the highlights of the meetings and the economy reports presented. You can view these videos below. All other presentations and documents discussed at the meeting are available on the annual meeting section of our website. Meeting Highlights Economy Reports APLMF Guide 1 - 'National Metrological Infrastructure Joint Guide 1' Second Edition Released5/2/2017
The APLMF is pleased to announce that it has recently released the second edition of APLMF Guide 1 - 'National Metrological Infrastructure Joint Guide 1'.
The updated guide is designed to provide an overview of elements of a national metrological infrastructure, with attention devoted to the situation of member economies in the Asia-Pacific region. Its starting point is a consideration of the international activities that underpin national metrology systems and of the organizations that carry out those activities. Can you view this and other APLMF guides here. Dear APMF Members and colleagues
Welcome to the President's Newsletter for March 2017. Please find below an overview of what the APLMF has been working on over the last couple of months. 24th Asia-Pacific Legal Metrology Forum and Working Group Meetings I am delighted to confirm the 24th APLMF and Working Group Meetings will be held in Siem Reap, Cambodia, Wednesday 25 – Friday 27 October 2017. We expect to have the meeting webpage live by the end of May and open registrations for this meeting. 23rd Asia-Pacific Legal Metrology Forum and Working Group Meetings – Highlights As my first Forum meeting as President there were many highlights which included discussions on the draft APLMF Strategic plan, the new Guidelines and Operation processes for Working Groups and coming up with some recommendations on how to do things differently. I always enjoy hearing the progress made in each of the Working Groups and reports from the economies and related organisations. Renewing contact with member representatives and having opportunities to discuss legal metrology issues across the region was invaluable. The draft minutes from the APLMF and Working Groups Meetings for feedback and our video summary will also be available on our website in the coming weeks. 25th Asia-Pacific Legal Metrology Forum and Working Group Meetings In 2018 APLMF will celebrate 25 years which is an exciting milestone. I am actively looking for an economy who would like to host this auspicious event. Please contact the Secretariat if you are interested in hosting and would like some more information about what hosting a forum event involves. ‘Full Member Only’ area of the website The primary contact for each full member economy were sent login and password details for the ‘full member only’ area of the website on 28 March 2017. It will be up to the primary contact to provide these details to staff within their economy. If your economy hasn’t received this information, please contact the Secretariat so we can check we have the correct details for the primary contact for your economy. Joint Guide 1 – National Metrological Infrastructure We are delighted to announce Joint Guide 1 – National Metrological Infrastructure is now available our website. Congratulations and thanks in particular to Grahame Harvey (Legal Metrology expert), Abdul Rashid Bin Zainal Abdin (APMP Coordinator), Marian Haire (Chair Training Coordination WG), members of MEDEA (PTB) and all who have contributed to developing this valuable Guide. Approving Guide and Administrative Documents A draft process for approving guide documents and administrative documents was agreed at the 23rd APLMF forum. We have 2 guide documents and a number of administrative documents for consultation and acceptance and we are taking a planned approach to releasing these to members using the approval structure. The primary contact for each full member economy was sent an email on 24 March 2017 with details. The first document for review and feedback is APLMF Guide 7 – Verification of Fuel Dispensers. As per the approval process, the period of time for members to give feedback is 3 months, so the deadline for this guide document is 30 June 2017. Test Procedure Survey – 2016 Training Courses
2016 Awards The success of APLMF is due to the contributions of many people and it was a pleasure to have so many nominations to consider at the 23rd APLMF meeting. Congratulations to those individuals listed below who have been officially recognised. Certificates will be presented at appropriate events over the coming months. Distinguished Service Award
Service Awards
Certificates of Appreciation For significant contribution to improving metrology within the Asia Pacific region through leadership of the Metrology Enabling Developing Economies in Asia (MEDEA) project.
All APLMF awards can be found on our website here. APEC and SRB meeting – February 2017 The APEC SRB Forum met on 19 February 2017 before the SCSC meeting on the 20th and 21st. The meeting focused on the work programme and in particular our internal governance structure and how we operate. We did this to identify how we can increase our effectiveness and strengthen our ability to support APEC activities. We also provisionally approved the Principles and Procedures governance document. The final step is for individual SRB governance groups to sign them off. One of the key outcomes of this will be the ability to appoint the SRB Convenor on a three year term. We also reviewed and endorsed The Terms of Reference for the role of the SCSC SRB Shepherd. To increase effectiveness of the SRB’s we agreed to undertake a review of the APEC Blueprint, priorities and work programme to identify the areas where each agencies specialist knowledge and capability can most effectively support APEC. The individual reviews will be completed by May and will enable the SRB forum to more effectively plan and coordinate its activities. We are working closely with the SCSC SRB Shepherd to develop a show case event in association with SOM3 in August 2017. I hope to be able to tell you more about the outcomes of this review and our show case event in future newsletters. Training for 2017 Please refer to our website which is updated as new information comes to hand. Please note registrations for the Joint APLMF/APMP Workshop – Modernising National Metrology Infrastructure being held in Malaysia 22-23 May closes 3 April 2017. Please note registrations for the Verification of Bulk Flow Meters for Petrol and Diesel being held in Thailand 24-27 July closes 28 April 2017. New Chair for the Working Group on Medical Measurement Please note Ms Suh-Chyin CHUNG the current Chair of this Working Group retired in late January. On behalf of our members, we thank Ms CHUNG for her contribution to this working group and wish her well in her retirement. We welcome Mr Chung-Lin WANG who has been appointed as the new chair of this Working Group. Mr WANG is the Deputy Director General, Bureau of Standards, Metrology and Inspection (BSMI), Ministry of Economic Affairs and has 25 years’ experience in metrology. Farewell to Mr Kevin GUDMUNDSSON, Secretariat’s Technical Expert, New Zealand’s APLMF representative and Pre-packaged Goods Working Group Chair Kevin who has been with Trading Standards since July 2009 and has been an active member of APLMF since 2013, will be taking up a role with New Zealand’s National Measurement Institute, Measurement Standards Laboratory, as the Manager for Length and Mass Quantities. Kevin will be sadly missed but we are pleased he will remain part of the measurement community. In his time he has delivered a packaged goods training workshop in Indonesia; assisted in setting up the Secretariat in NZ, where he has made a significant contribution to the website; test procedure surveys, guide documents, e-learning modules; and even found time to assist in the Secretariat’s duties at the recent Forum meeting in Japan. The Secretariat wishes Kevin the best of luck in his new role. Kevin’s new email address is kevin.gudmundsson@measurement.govt.nz Invoices for APLMF Membership Fees Invoices for 2017 were sent to the primary contact for each member economy in December 2016. Please contact the Secretariat if you have not received an invoice for your economy. Future Newsletters At the APLMF meeting in Japan in 2016, it was suggested and agreed that member economies contribute to future newsletters with a short article of interest and that we have a roster. As this was a great suggestion from Australia, I propose we start at the A’s and invite the following economies to submit their articles for this 2017.
Other Events Australasian Measurement Conference - MSA2017 - 'Realising the value of metrology' Brisbane - 12-14 Sep 2017 The 2017 Australasian Measurement Conference (MSA2017) is being held from 12-14 September in Brisbane, Australia. This years conference will focus on 'Realising the Value of Metrology'.
A call for papers relating to the theme is now open, you can find more about this here. You can also find more information about the theme, the programme and all the key dates on the Metrology Society of Australasia website. Trainers Report on Training Course on Verification of Calibration of CNG Dispensers held in Malaysia, September 2015 was hosted by National Institute of Malaysia and Ministry of Trade, Consumerism & Cooperative of Malaysia.
|
Archives
October 2023
Categories
|